How to avoid Epson Stylus NX300 Waste Ink Tray Overflow?
Contact Support To Get Wic Serial Key :
Whatsapp: +0084 915 589 236
Have you ever met the problem called the Waste Ink Counter Overflow in Epson printers? This is common problem in Epson series, the Epson printers have the Waste Ink Counter that used to calculate the waste ink flowing into the Waste Ink Tray.
When the waste ink is full as well as the Waste Ink Counter is more than 100%, the Epson Stylus NX300 printer will stop to ensure the safe of the printer. You can see the red lights flashing continuously and “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support” appears on the screen.
For the new printer series, the Waste Ink Counter is installed at 100% before the printing process makes the Waste Ink Tray be full or the Waste Ink counter raises.
You can see on our website the software to reset the Waste Ink Counter come back to 0%, this is called WIC RESET TOOL. You can reset your printer’s Waste Ink Counter by yourself by the detailed guide then your printer can run well.
Moreover, you need to watch out that your Epson Stylus NX300 printer is new or old series because some reasons, if your printer is new printer, you don’t need to worry about the waste ink after resetting procedure. However, your Epson Stylus NX300 printer’s Waste Ink Counter needs to be cleaned up the waste ink after resetting because the waste ink can be overflowed and affect to the other components of printer or make your Epson Stylus NX300 printer’s table dirty.
You have to collect the waste ink out of the Waste Ink Pad after resetting Waste Ink Counter but you need to hajve the good skills and careful when open the printer.
You don’t need to disassemble the components and check regularly to prevent the waste ink from overflowing depending on the better solution called WIC RESET TOOL.
How to void waste ink counters and waste ink pad overflow.
To find the methods avoid the overflowing of the Waste ink Pad in Epson, we need to find some principles of Waste Ink Counters on the Epson printer.
What is Epson Stylus NX300 waste ink counter overflow and how to avoid?
1. What is Epson Stylus NX300 waste ink counter overflow?
Epson inkjet printers have inside a part of sponge for absorbing and collecting waste inks. It is called waste ink pad.
Waste Ink Pads are several porous pads in the inkjet printer that collect, distribute, and also really importantly include the ink that is not used on printed pages (Waste Ink).
Waste Ink is collected by these pads during the initial setup of the product, during cleaning cycles and when printing borderless photographs.
While printhead cleanup process ink flush through printhead to waste ink pad. Then one time it can be overflowed because it could not absorb ink ever again then the ink are going to leak from the bottom of the inkjet printer.
The inkjet printer counts how many ink flow to waste ink pad and then stores this number into printer’s memory ==> This number is named Waste Ink Counter.
+ To avoid ink leaking outside the Epson Stylus NX300 printer the waste ink counter may be overflowed and then Epson Stylus NX300 printer is going to stop.
+ Full counter is 100%. Waste ink counters overflow means that counters values are more than 100%.
To get Epson Stylus NX300 printer printing again – You must to RESET the Epson Stylus NX300 printer Waste Ink Counter (Read more to learn how to reset epson printer).
2. How to know that your Epson Stylus NX300 printer waste ink counter overflow?
+ Your Epson Stylus NX300 printer red light blinking
+ Your printer LCD screen or computer screen appear: “The Printer’s Ink Pads are at the end of Their service life. Please contact Epson Support” or “The Printer’s Ink Pad is at the end of Its service life. Please contact Epson Support”.
=> Read more
+ It is very easy to check Epson waste ink counters with WIC Reset Utility.
Step 1. Download WIC Reset Tool here: Download WIC Reset
Step 2. Run WIC Reset Utility, Click on READ WASTE COUNTERS button:
Step 3. Watch the message. If one or two counters are more than 100% (overflowed) – Epson Stylus NX300 printer can not printing – you need to RESET WASTE INK COUNTERS number
3. How to fix Epson Stylus NX300 waste ink counter overflow?
Step 1: Download WIC Reset Tool and install the software
Download WIC Reset here
Step 2: Buy the WIC RESET KEY
==> Buy full WIC Reset Key
Step 3: Reset your printer with WIC Reset and WIC Reset Key
+ Connect your Epson Stylus NX300 printer to computer that you installed WIC reset tool. Connect computer to Internet.
+ Follow this guide and reset Epson Stylus NX300 – Read how to reset Epson Stylus NX300 printer
=> Tips how to avoid Epson Stylus NX300 printer Waste Ink Counters overflow: Read here
How to avoid Epson Stylus NX300 printer Waste Ink Pad overflow?
When you apply all the detail hack Epson Stylus NX300 printer’s waste ink pad. We provide you about the problem called Waste Ink Counter bellow, You can find different location of the Waste Ink Pad in different Epson printer series.
Before starting with the detail steps we need to find some information about the ideas: As we know that the waste ink of the printer is constructed to flow into a wire pine to the Waste Ink Pad then they are collected by the sponge in the Waste Ink Pad, this make the waste ink not to overflow out of the Epson Stylus NX300 printer but the sponge has the limited absorbing ability so when the sponge is not able to absorb the waste ink, it’ll overflow.
There are many solutions for you such as replacing the Waste ink Pad or using something to suck all the waste ink, you can also follow the waste ink to a bottle that can contain the waste ink during the printing procedure. You can set your mind at rest that your Epson Stylus NX300 printer will not overflow the ink, everything you need is bring the bottle to pour then clean it.
Please follow these steps to allow the waste ink flow into the alternative bottle:
Step 1: Checking and open the cover of waste ink pad:
Turn the Epson Stylus NX300 printer then you can see the small cover as the picture below, this is the waste ink pad’s cover.
Open it and you can see a tube and the waste ink pad with the sponge to absorb the waste ink as the picture below.
Then you can realize that the Epson Stylus NX300 printer’s waste ink pad is larger than the gate to go over the waste ink pad you have already opened when you see. Disassembling the shell and this way needs to be done carefully, you have to take your printer to a service center.
To avoid this case, you can follow and apply our method that doesn’t need to remove any thing, let’s see in the second step:
Step 2: Separate the waste ink tube out of the Waste Ink Pad:
When you find the Waste Ink Pad of the Epson Stylus NX300 printer and the waste ink tube, you can use a tool to separate the waste ink tube iut of the waste ink pad. Please move everything softly and carefully to prevent the damage of the tube.
Be gentle and careful to avoid folding or cracking waste ink pipes of Epson Stylus NX300 printer.
Step 3: Clean the tube and absorb all the waste ink from the waste ink pad, you can use a cylinder to suck the waste ink in the waste ink tube of the Epson printer.
Next, you also need to suck the waste ink form the sponge if the Epson Stylus NX300 printer is new one you can skip this step but not for the old printer because of being overflow the waste ink while the transferring procedure is running.
By this way, don’t worry about the waste ink overflowing when you don’t use the bottle to contain the waste ink. However, you have to check and suck the waste ink regularly so I think you should use a bottle to collect the waste ink.
Step 4: Install the bottle out of the printer.
– A bottle made from plastic or glass.
– A relative tube is as equal as the tube of the printer.
– The connection tool.
You can see in this picture to know how to install and assemblr all the component together to avoid the Epson Stylus NX300 printer’s waste ink pad overflow.
You can print some contents right now to check that your printer is working well or not as well as the waste ink can be absorbed or not
After the bottle is full of waste ink you can bring it to clean then go on using.
Watchout: This is an good solution and you can use it in a long-term but you should use a tool called WIC RESET TOOL to reset Epson Stylus NX300 printer’s Waste ink counter when it overflow. You can see to install this software in our other post.
Thank you for your looking at page “How to avoid Epson Stylus NX300 waste ink pad overflow”.
Contact Support To Get Wic Serial Key :
Whatsapp: +0084 915 589 236